Friday, October 30, 2020

Required Roof Conditions for Infrared Flat Roof Moisture Survey

From Jersey Infrared Consultants


The requirements listed below are based on current industry standards, including those published by ASTM, RCI and Infraspection Institute. Compromising on any of these requirements may adversely affect the results of the Infrared Flat Roof Moisture Survey.

Dry Roof Membrane: 

The roof membrane must be dry at Sunrise. Areas that had moisture at Sunrise may not have enough solar loading to show the necessary thermal patterns. Since an infrared imager cannot “see through water”, any areas with the presence of ice, snow, or standing water cannot be surveyed.

Solar Loading:

The day of the Survey should be a mostly sunny day, providing good solar loading. A general rule of thumb is if the roof surface or a nearby similar surface (i.e. parking lot, street or sidewalk) is warm to the touch, the roof will be warm.

Read the whole story on the JerseyIR Consultants website at:

Tuesday, October 27, 2020

1586A Super-DAQ Demo Video Series



Fluke Calibration offers a series of videos on the 1586A Super-DAQ Precision Temperature Scanner.

The 1586A is a highly accurate and flexible temperature data acquisition with some very unique capabilities. These videos will show you what the 1586A Super-DAQ can do for you.

Friday, October 23, 2020

Sea level mission will also act as a precision thermometer in space


When a satellite by the name of Sentinel-6 Michael Freilich launches this November, its primary focus will be to monitor sea level rise with extreme precision. But an instrument aboard the spacecraft will also provide atmospheric data that will improve weather forecasts, track hurricanes, and bolster climate models.

"Our fundamental goal with Sentinel-6 is to measure the oceans, but the more value we can add, the better," said Josh Willis, the mission's project scientist at NASA's Jet Propulsion Laboratory in Southern California. "It's not every day that we get to launch a satellite, so collecting more useful data about our oceans and atmosphere is a bonus."

A U.S.-European collaboration, Sentinel-6 Michael Freilich is actually one of two satellites that compose the Copernicus Sentinel-6/Jason-CS (Continuity of Service) mission. The satellite's twin, Sentinel-6B, will launch in 2025 to take over for its predecessor. 

Together, the spacecraft will join TOPEX/Poseidon and the Jason series of satellites, which have been gathering precise sea level measurements for nearly three decades. Once in orbit, each Sentinel-6 satellite will collect sea level measurements down to the centimeter for 90% of the world's oceans.

Read the whole story online at: 

https://sealevel.nasa.gov/news/193/sea-level-mission-will-also-act-as-a-precision-thermometer-in-space

Wednesday, October 21, 2020

Researchers develop smallest particle sensor in the world

 

GRAZ UNIVERSITY OF TECHNOLOGY











It is slightly smaller than two one-cent coins stacked on top of each other, is particularly energy-efficient due to its size, requires no maintenance and can be integrated in mobile devices. It is the smallest particle sensor in the world. 

With this 12 x 9 x 3 millimetre innovation, smartphones, smart watches or fitness wristbands can for the first time measure the quality of the ambient air in real time and sound the alarm in the event of increased fine dust values. 

Innovative implementation 

The sensor was developed by Paul Maierhofer as part of his dissertation at the Institute of Electrical Measurement and Sensor Systems at Graz University of Technology together with experts from the semiconductor manufacturer ams AG and with researchers from Silicon Austria Labs (SAL). The development was based on well-known methods of conventional measuring instruments as well as modern manufacturing and integration methods, which brought the project team together in an innovation process. 

The innovation is the miniaturization itself, as Maierhofer explains: "The sensor is right at the limit of what is physically and technically feasible and involves a lot of tricks to function at this size." 

Adapting behaviour to ambient air 

The immense social benefit of this new innovative particle sensor is obvious. According to a study by the European Environment Agency (EEA), over 400,000 people die prematurely every year in Europe alone as a result of particulate matter pollution. 

With the help of wearables equipped with the new particle sensor, each and every individual can monitor the ambient air and react immediately in the case of health-endangering fine dust values. "For example, by avoiding particularly polluted routes when jogging or on the daily commute to work," says Alexander Bergmann, head of the Institute of Electrical Measurement and Sensor Systems at TU Graz and doctoral supervisor of Paul Maierhofer. 

Improving air quality 

Not only in wearables, the sensor can also be integrated in local applications - both in the home and outdoors - and thus provides an unprecedented variety of measured values. 

Bergmann is convinced that this represents a break from the past in air quality monitoring: "Close-meshed and comprehensive monitoring of air quality has so far failed due to the size, complexity and cost of currently available measuring sensors. Our particle sensor fills a gap here." 

The data obtained can serve as a basis for further regulatory measures and raise public awareness of the particulate matter problem. The series production aimed at by semiconductor manufacturer ams is intended to achieve a price that is significantly lower than the currently available sensors. 

This research is anchored in the Fields of Expertise "Mobility & Production" and "Sustainable Systems", two of five strategic focal areas of Graz University of Technology. 
 
The Institute of Electrical Measurement and Sensor Systems at TU Graz is one of the world's leading institutions in the field of particle measurement. At EU level, researchers from the Institute are involved in the Horizon2020 projects CARES (for more information, see TU Graz News), DownToTen (News report from January 2020) and SENSmat (http://www.sensmat.eu). 

About ams AG

ams is an international leader in the development and manufacture of high-performance sensor solutions. The product portfolio includes sensor solutions, sensor ICs as well as interfaces and the associated software for customers in the markets of consumerism, mobile communications, industry, medical technology and automotive engineering. ams, headquartered in Premstätten/Austria, employs about 9,000 people worldwide and is an important partner for more than 8,000 customers worldwide. ams is listed on the SIX Swiss Exchange (ticker symbol: AMS). 

Further information about ams, see https://ams.com 

 Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert system. 

Wednesday, October 7, 2020

Accurate Fever Scanning with Infrared Forehead Thermometers: Issues, Solutions and How to Calibrate

 FlukeCal Publishes Helpful Article Online



Because of the COVID-19 pandemic, there is a lot of interest in measuring human body temperature. I’m sure you’ve seen articles or you had your own temperature measured as you entered a public place like a store or medical building. 

Most of the interest in measuring human body temperature is in the area of non-contact or infrared (IR) temperature measurement. Infrared measurements are ideal for this fever screening because making the measurement only takes a few milliseconds, and you don’t have to touch the person or object you are measuring, which helps prevent further spread of CoronaVirus. 

Article overview 

 We know a lot about radiation thermometry here at Fluke Calibration. We manufacture some of the best IR calibration standards in the world and our experts are recognized in the metrology community. For example, Frank Liebmann is a recognized expert in the field, and he has contributed many technical articles and scientific papers on this subject.

 Frank has trained hundreds from around the world on proper methods for performing IR temperature measurements and calibrations. Thanks to Frank and other Fluke IR experts, we can provide answers for the challenging questions you may have.

 In this post I’m going to answer some basic questions about IR thermometers for human fever screening, such as how they measure, some of the challenges with using them for human body temperature measurement, and how to check the accuracy to know that an instrument is living up to its claimed specifications. 

 We’re also working on more technical content which will be published at a later date. If you are interested in being informed about that, please sign up for our email list. 

Increasing the accuracy of your temperature measurements.

Monitor Newsletter at Windmill Software ( https://www.windmill.co.uk/ ) regularly publishes useful articles related to measurement, control,...